What this lesson covers
- The scale factor as a dial, turned from 1 to 2 to 3
- Two tracks side by side: perimeter 14, 28, 42 against area 12, 48, 108
- Why 42 is a real number on the page and still the wrong answer
- The three powers: lengths to the first, areas to the second, volumes to the third
- Three traps, including reaching for the cube rule on a flat figure
Worked examples
The questions the video works, written out: the setup, each step, the answer and the trap.
0:14Example 1
Rectangle A has a length of 4 centimeters and a width of 3 centimeters. Rectangle B is a scale drawing of rectangle A in which every side is 3 times the corresponding side of rectangle A. What is the area, in square centimeters, of rectangle B? A) 36 B) 42 C) 108 D) 324
- Rectangle A is 3 by 4, so its perimeter is 2(3+4)=14 and its area is 3×4=12.
- Scale every side by 3. Rectangle B is 9 by 12.
- Area of B: 9×12=108. That is 12×32=12×9, not 12 times 3.
- See the pattern at a scale factor of 2 first: the sides become 6 and 8, the perimeter doubles to 28, and the area becomes 48, which is four times 12. Lengths scale by the factor. Areas scale by the factor squared.
Answer: C) 108
Choice A is 12×3=36, the area scaled like a length. Choice B is 42, the perimeter of rectangle B (14×3), a length answering an area question. Choice D is 12×27=324, the factor cubed, which is the rule for the volume of a solid and not for a flat figure.
Chapters
Lesson transcript
The narration of the video, word for word, under its chapter headings.
0:14The scale drawing
Rectangle A is three by four, so its area is twelve. Rectangle B is a scale drawing of A, and every side is three times as long. The question wants the area of B. Three of the four choices come from using the wrong power of three.
0:32Turn the factor
Put the scale factor on a dial and turn it. At one, B is the same as A: sides three and four, perimeter fourteen, area twelve. Turn the dial to two. Sides become six and eight. The perimeter doubles to twenty eight, but the area does not double. It becomes forty eight, which is four times twelve.
0:54Two laws, three wrong answers
Turn the dial to three, the number the question gave you. Sides nine and twelve. Perimeter forty two, which is fourteen times three. Area one hundred eight, which is twelve times nine. Lengths scale by the factor. Areas scale by the factor squared. That is the whole rule. Choice A is twelve times three, the area scaled like a length. Choice B is forty two, the perimeter of B answering an area question. Choice D is twelve times twenty seven, the volume rule used on a flat figure.
1:25Three ways this goes wrong
Three traps. One, scaling the area by the factor instead of the factor squared, which is the single most common miss on this question type. Two, answering with a length when the stem asked for an area, or the reverse. Three, forgetting that the same idea runs one step further: if the figure is solid, volume scales by the factor cubed. One factor, three powers. Lengths to the first, areas to the second, volumes to the third.
Scale a length by the factor. Scale an area by the factor squared. Every time.
Read the written version: the Area and volume strategy guide, then try 25 hard Area and volume questions with full explanations. Both are free, no account needed.